Domain Status Codes Explained: What clientTransferProhibited, clientHold, serverHold and pendingDelete Mean

Run a WHOIS or RDAP lookup on any domain and somewhere in the output you will find a line like this:

Domain Status: clientTransferProhibited
Domain Status: clientDeleteProhibited
Domain Status: clientUpdateProhibited

Those are EPP status codes. EPP (Extensible Provisioning Protocol) is the protocol registrars use to talk to registries, and the status codes are the registry's record of what is currently allowed to happen to your domain, and what is currently happening to it. They are the closest thing a domain has to a health readout, and most people never look at them until something has already gone wrong.

This article lists every code, what it means, and the part that matters: which ones you want on your domain, and which ones appearing or disappearing should be treated as an incident.

Two kinds of code: client and server

The prefix tells you who set it.

  • client codes are set by your registrar (GoDaddy, Namecheap, Cloudflare Registrar, and so on). You can usually add or remove them from your registrar's control panel, and a registrar's own compliance or abuse team can set them too.

  • server codes are set by the registry, the operator of the TLD itself (Verisign for .com and .net, Identity Digital for .io, and so on). Your registrar cannot remove a server code on its own. It has to ask the registry.

That distinction is the first thing to check when you see an unfamiliar code. A client code is a conversation with your registrar. A server code is usually a legal, compliance, or dispute matter that has gone above your registrar's head.

The codes you want to see

These are the protective locks. A well-managed domain has all three of the client ones. ICANN's own guidance is that asking your registrar to set them "can help to prevent unauthorized transfers, deletions, or updates to your domain."

Code

What it does

clientTransferProhibited

Tells the registry to reject any request to transfer the domain to another registrar. This is the registrar lock or transfer lock most registrars expose as a toggle. It is the single most important line in your WHOIS output.

clientDeleteProhibited

Tells the registry to reject delete requests. Protects against an accidental or malicious deletion from inside a compromised registrar account.

clientUpdateProhibited

Tells the registry to reject updates: nameserver changes, contact changes. Some registrars set this automatically alongside the other two. Some do not.

serverTransferProhibited, serverDeleteProhibited, serverUpdateProhibited

The same three locks, applied at the registry. Usually the result of a registry lock service (an extra-cost product some registrars sell for high-value domains) or of a legal hold. If you did not ask for these, find out why they are there.

If you see only ok, the domain has none of these. ICANN's description of ok is exact: "the standard status for a domain, meaning it has no pending operations or prohibitions." That is not a good status for a domain you care about. It means anyone with access to the registrar account can transfer it away, and nothing at the registry will refuse.

The codes that mean something is in progress

Each of these says a request has been received and is being processed. The question to ask is whether you made the request.

Code

Meaning

If you didn't ask for it

pendingTransfer

A request to move the domain to a new registrar has been received.

Contact your registrar immediately. A transfer you did not initiate is a hijack in progress, and under ICANN's transfer policy a registrar that does not respond within five calendar days is treated as having approved it.

pendingUpdate

An update to the registration is being processed.

Contact your registrar and find out what changed.

pendingRenew

A renewal is being processed.

Usually harmless. Contact your registrar if you did not renew.

pendingCreate

The initial registration is being processed.

Only seen on brand-new domains. If you are not the listed registrant, contact the registrar.

pendingRestore

Your registrar has asked the registry to restore a domain from redemption.

Watch the status over the following seven days. If it reverts to redemptionPeriod, the restore did not complete.

The codes that mean the domain does not resolve

Two codes stop your domain being published in the DNS. If either appears, your website and email are down or about to be.

  • clientHold is set by the registrar. ICANN's description: it tells the registry "to not activate your domain in the DNS," so the domain will not resolve. The common causes are an unverified registrant email (the ICANN contact-verification requirement), a payment dispute, or an abuse complaint.

  • serverHold is set by the registry. Same effect, but your registrar cannot lift it alone. Typically a registry compliance action, a court order, or a UDRP outcome.

A hold is different from an expired domain: the registration still exists and still belongs to you. But from the outside it looks identical, NXDOMAIN on every lookup, and it is often the first sign an organisation gets that a registrar email went to a mailbox nobody reads.

The codes on the way out: expiry, redemption, deletion

This sequence is what happens after a domain expires and nobody renews it. The timing is set by ICANN policy, so it is the same across gTLDs.

  1. autoRenewPeriod: the registry has auto-renewed the domain at expiry and is giving the registrar a grace period to decide whether to keep it. The domain usually still resolves. If you see this on a domain you own, you have not paid the renewal.

  2. redemptionPeriod: the registrar has asked the registry to delete the domain. It is held for 30 days, during which it can be restored, usually at a substantial fee on top of the renewal. The domain does not resolve.

  3. pendingDelete: the 30 days have passed with no restore. The domain remains in this status for several days and is purged five calendar days after the end of the redemption period. It then becomes available for anyone to register.

If you see redemptionPeriod or pendingDelete on a domain you intend to keep, ICANN's advice is one sentence: contact your registrar immediately. Once the purge happens the domain is gone, and drop-catchers register expired domains within seconds of release.

The less dramatic grace codes, addPeriod (just registered), renewPeriod (just renewed) and transferPeriod (just transferred), mark a short window after each operation and are nothing to act on, unless the operation is one you did not perform.

Which changes are incidents

The list above is static. What you actually need to notice is change. From the point of view of someone protecting a domain, these are the transitions that matter, in rough order of severity:

Change

What it usually means

clientTransferProhibited disappears

Someone unlocked the domain. This is the first step of every registrar transfer, authorised or not. If you are not mid-transfer, treat it as a compromised registrar account until proven otherwise.

pendingTransfer appears

A transfer is in flight. Five days to stop it.

clientUpdateProhibited disappears, then nameservers change

The pattern of a domain hijack via the registrar: unlock, repoint. See How to protect a domain from hijacking.

clientHold or serverHold appears

The domain has stopped resolving, or will at the next cache expiry.

autoRenewPeriod appears

You missed a renewal. Still recoverable and still resolving.

redemptionPeriod appears

You are 30 days from losing the domain.

Any server lock appears unexpectedly

A legal or compliance hold. Find out who filed it.

The uncomfortable fact about this table is that nothing in the DNS tells you any of it happened. Status codes live in the registry, not in your zone. A lock can be removed and a transfer started while every DNS record on the domain still resolves exactly as it did yesterday. The first DNS-visible symptom, a nameserver change, comes at the end of the process, not the start.

How to check your own domains

For a one-off check, run an RDAP or WHOIS query. RDAP is the structured, ICANN-mandated replacement for WHOIS and returns the same status codes as a JSON array:

curl -s https://rdap.org/domain/example.com | jq .status

Or use your registrar's control panel, which normally shows the lock state as a toggle and the rest of the codes on the domain's detail page.

For anything you would mind losing, a one-off check is not enough. The value is in noticing the change, on the day it happens. DNS Spy re-reads the registration record for every monitored domain daily, keeps the full history, and sends a WHOIS Information Changed alert whenever the registry's record is updated. The alert lists the status codes as they now stand, so a lock that has gone missing is visible in the notification rather than in an audit six months later. Domain expiry is tracked separately by the Security Center at 90, 30 and 7 days and on the day it lapses.

The WHOIS and domain expiration monitoring page covers what is tracked in detail. To see the nameservers and registrar for a domain right now, without an account, run it through the free scan.

Quick reference

Code

Set by

Effect

Want it?

ok

registry

No locks, nothing pending

No. Add locks

clientTransferProhibited

registrar

Blocks transfer

Yes

clientDeleteProhibited

registrar

Blocks deletion

Yes

clientUpdateProhibited

registrar

Blocks updates

Yes, if your workflow allows

serverTransferProhibited, serverDeleteProhibited, serverUpdateProhibited

registry

Same locks, registry level

Only if you requested registry lock

clientHold, serverHold

registrar or registry

Domain removed from DNS

No

clientRenewProhibited, serverRenewProhibited

registrar or registry

Renewal refused

No. Resolve with registrar

pendingTransfer, pendingUpdate, pendingRenew, pendingCreate, pendingRestore

registry

Operation in progress

Only if you started it

addPeriod, renewPeriod, transferPeriod, autoRenewPeriod

registry

Post-operation grace window

Informational

redemptionPeriod

registry

30-day recovery window after deletion request

No. Act now

pendingDelete

registry

Days from being purged

No. Act now

inactive

registry

No nameservers delegated

No. Check registrar

Definitions follow ICANN's EPP status code reference.

Frequently asked questions

What does clientTransferProhibited mean?

clientTransferProhibited is the registrar lock. It tells the registry to reject any request to move the domain to another registrar until the lock is removed from inside your registrar account. It is the single most important status code on a domain you care about, and if it is missing you should enable it today.

What is the difference between clientHold and serverHold?

Both remove the domain from the DNS so it stops resolving. clientHold is set by your registrar, usually for an unverified contact email, a payment dispute or an abuse complaint. serverHold is set by the registry itself, typically for a compliance action, court order or dispute outcome, and your registrar cannot lift it alone.

How long do I have to recover a domain in redemptionPeriod?

Thirty days. During redemptionPeriod the registry holds the deleted domain and your registrar can restore it, usually for a substantial fee on top of the renewal. Once the 30 days pass the domain moves to pendingDelete and is purged five calendar days later, after which anyone can register it.

Why is a domain status of "ok" a problem?

ICANN defines ok as a domain with no pending operations and no prohibitions. That means no transfer, delete or update locks are in place, so anyone with access to the registrar account can move the domain away and the registry will not refuse. Ask your registrar to add the three client locks.